he PCB 130 series of Array Microphones are prepolarized, condenser microphones coupled with ICP sensor powered preamplifiers and are thus referred to as ICP microphones. This eliminates the need to purchase a separate preamplifier. The 130 series microphones provide an extremely cost-effective method for large channel count sound pressure measurements. Typical applications include sound pressure mapping, acoustic mode analysis, near-field acoustic holography, and vibro-acoustic testing, along with other applications.
Vibration Sensor Cable - Amphenol 2 Pin MIL to BNC
₹3,200.00 Original price was: ₹3,200.00.₹2,600.00Current price is: ₹2,600.00.
power Adapter
₹17,000.00 Original price was: ₹17,000.00.₹15,000.00Current price is: ₹15,000.00.
130F20 ICP® Electret Array Microphone
₹57,600.00
ICP® Array Microphone with integral preamplifier, BNC jack connector, TEDS
- Nominal Microphone Diameter: 1/4″
- Sensitivity: 45 mV/Pa
- Inherent Noise: 29 dB re 20 µPa
Categories: Microphone, SENSORS
Description
Specification
Specification Notes
[1] Typical.
[2] TEDS Capable Digital Communication, compliant with IEEE 1451.4
[1] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Nominal Microphone Diameter | 1/4″ | 1/4″ | |
Frequency Response Characteristic (at 0° incidence) | Free-Field | Free-Field | |
Frequency Response (±2 dB) | 20 to 10000 Hz | 20 to 10000 Hz | |
Frequency Response (±3 dB) | 10 to 16000 Hz | 10 to 16000 Hz | |
Frequency Response (±4 dB) | 10 to 20000 Hz | 10 to 20000 Hz | |
Phase Match (100 Hz to 3 kHz) | ±3 ° | ±3 ° | [1] |
Phase Match (50 Hz to 5 kHz) | ±5 ° | ±5 ° | [1] |
Phase Match (5 kHz to 10 kHz) | ±10 ° | ±10 ° | [1] |
Sensitivity | 45 mV/Pa | 45 mV/Pa | |
Sensitivity (+/-3 ) (@ 250 Hz) | -26.9 dB re 1 V/Pa | -26.9 dB re 1 V/Pa | |
Inherent Noise (Linear) | 29 dB re 20 µPa | 29 dB re 20 µPa | [1] |
Inherent Noise (A Weighted) | <26 dB(A) re 20 µPa | <26 dB(A) re 20 µPa | |
Inherent Noise (A Weighted) | 24 dB(A) re 20 µPa | 24 dB(A) re 20 µPa | [1] |
Dynamic Range (3% Distortion Limit) | >122 dB re 20 µPa | >122 dB re 20 µPa | |
TEDS Compliant | Yes | Yes | [2] |
Environmental | |||
Temperature Range (Operating) | +14 to +122 °F | -10 to +50 °C | |
Temperature Effect on Output (-10 to +50 °C) | 0.7 dB | 0.7 dB | [1] |
Electrical | |||
Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Bias Voltage | 5.5 to 14 VDC | 5.5 to 14 VDC | |
Output Impedance | <150 Ohm | <150 Ohm | |
Physical | |||
Housing Material | Stainless Steel | Stainless Steel | |
Electrical Connector (Output) | BNC Jack | BNC Jack | |
Size – Diameter (overall) | 0.5 in | 12.7 mm | |
Size – Length (overall) | 2.63 in | 66.8 mm | |
Size – Diameter (head) | 0.28 in | 7 mm | |
Size – Length (head) | .87 in | 22.1 mm | |
Weight | 0.90 oz | 25.5 gm | [1] |
* All specifications are at room temperature unless otherwise specified.
Datasheet
Datasheet
Product Specifications
Product Manual
Drawing
Reviews (0)
Be the first to review “130F20 ICP® Electret Array Microphone” Cancel reply
Related products
141A100,Miniature Tri-axial IEPE Accelerometer
₹121,145.00
AC 192-1D, COMPACT MULTIPURPOSE ACCELEROMETER
₹16,280.00
AC102-1D, MULTIPURPOSE ACCELEROMETER
₹14,750.00
MULTIPURPOSE ACCELEROMETER, TOP EXIT 2 PIN CONNECTOR, 100 MV/G, ±10%
- 30-900,000 CPM Frequency Response (±3dB)
- -58 to 250 °F (-50 to 121 °C) Temperature Range
- Welded, Hermetic Sealing
- CTC's Best Selling, Multi-Purpose Sensor Ideally Suited for Thousands of Applications
- Qualifies for Free Annual Recalibration
AC153-1D LOW FREQUENCY ACCELEROMETER
₹34,900.00
IH-01, Impact Hammer
₹67,000.00
Proximity Probe with Driver
₹88,000.00
PROXIMITY PROBE, 8 MM PROBE TIP DIAMETER, WITH 3/8-24 OR M10X1 CASE THREAD
- Measure shaft vibration and displacement on machinery with fluid film bearings.
- Durable PPS over-molded probe tips withstand harsh conditions when monitoring critical machinery such as turbines and compressors.
- Complete hardware system is compatible with all standard condition monitoring software
EDDY CURRENT DRIVER COMPATIBLE WITH 8 MM PROXIMITY PROBE SYSTEMS, VOLTAGE OUTPUT
- API Standard 670 specified format
- Isolated voltage output standard at BNC and terminal block Vout and Com
- Upgraded to include SecureLock connector
UEB332, ULTRASOUND SENSOR
₹44,560.00
Reviews
There are no reviews yet.